Best Plasma Cutters under $1000 in 2022 – Unbiased Reviews of All Time

Are you interested in getting into plasma cutting & wondering if it’s possible to purchase high-quality equipment for around $1,000? Selecting the appropriate plasma cutter might make your tasks simpler to accomplish and more attractive once you’re done. These cutters offer the most mobility, lightness, and speed while maintaining suitable cutting thickness.

Jenny William – a manager of a renowned American company, says unbeatable cuts can only produce with one of these machines without breaking the bank. You can choose from a list of 8 inexpensive Best Plasma Cutter Under $1000 that I’ve tested thoroughly, starting with the directions and going through the first cut. Thus, Lotos LTPDC2000D is my editor’s first choice.

We have come up with an in-depth review article on the best plasma cutters under $1000 to make your search a little bit easy.

So here we go.

TOP PICKS

Lotos LTP5000D

Lotos LTP5000D

  • Weight: 19.4 pounds
  • Dimensions: 15x6x12 inches
  • Duty cycle: 60% @ 50 A

 

LOTOS

LOTOS LTPDC2000D

  • Weight: 43 pounds
  • Dimensions: 15.5x8x12 inches
  • Clean cut: ½ inch

 

PrimeWeld

PrimeWeld 50D

  • Weight: 23 pounds
  • Dimensions: 15x12x6 inches
  • Duty cycle: 60% @ 50A

 

Best Plasma Cutters  under $1000 in 2022

IMAGE
PRODUCT
DETAILS
PRICE

Lotos LTP5000D

Lotos LTP5000D 50Amp
  • Input voltage: 110/220V
  • Output current: 10-50 Amp
  • Cut Thickness: ½ inch
  • Severance Thickness: ¾ inch

LOTOS LTPDC2000D

LOTOS LTPDC2000D
  • Input voltage: 110/220 V
  • Dual-frequency: 50-60 Hz
  • Clean cut: ½ inch
  • Severance cut: ¾ inch

PrimeWeld 50D

PrimeWeld 50D Air Inverter
 
  • Input voltage: 120/220 volts
  • Output current: 10-50 Amps
  • Duty cycle: 60% @ 50A
  • Weight: 23 pounds

Coral CUT50 50 Amp Dual Voltage

Coral CUT50 50 Amp Dual Voltage
  • Duty cycle: 85%
  • Input voltage: 110/220 V
  • Output current: 20-50amp
  • Max cut Thickness: 20mm

LOTOS LT5000D

LOTOS LT5000D 50A
  • Input voltage: 110/220V
  • Output current:10-50Amp
  • Duty cycle: 60% @ 50A
  • Pilot Arc: No

Related:

1. Lotos LTP5000D 50Amp

BEST Overall

★★★★★

Lotos LTP5000D best plasma cutter under $1000

Specifications:

  • Weight: 19.4 pounds
  • Dimensions: 15x6x12 inches
  • Duty cycle: 60% @ 50 A
  • Input voltage: 110/220V
  • Output current: 10-50 Amp
  • Cut Thickness: ½ inch
  • Severance Thickness: ¾ inch
  • Recommended gas inlet flow: 3.6 [email protected] 65psi

Lotos plasma cutters come under the category of best plasma cutters under $1000 because of the value they offer. These cutters are lightweight and compact with superior cutting technology. Lotos LTP5000D Non-Touch Pilot Arc Plasma Cutter cuts the metals with any paints, rust or grease on the surface. The efficiency of the non-touch pilot arc allows cutting the metal without touching the metal surface. As it works on dual voltage, it can cut multiple thicknesses with accuracy and cleanliness. This plasma cutter includes the following features:

Features

Non-touch pilot arc plasma cutter

The Lotos LTP5000D 50 Amp works on non-touch pilot arc technology. It allows the cutter to make cuts without touching the surface of the metal. Moreover, the cutter is capable of cutting rusty and painted surfaces.

Economical and safe

The plasma cutter features a handle on its top for maximum portability. It helps to carry the plasma anywhere you want. It also uses non-hazardous compressed air, which is safe and harmless during the cutting process.

Cutting Capability

It can cut steel plate up to ½” with a maximum severance cut of ¾”. It goes for a maximum thickness of ½” @ 50 Amps for stainless steel and aluminium, while the cutting thickness for aluminium is ⅝”. It is a suitable plasma cutter for aluminium, copper, stainless steel, mild steel and alloy steel.

Advanced PPST technology

It has an advanced PPST cooling system. This ensures high performance and the long lifespan of the plasma cutter.

Dual voltage

The plasma cutter works on the dual voltage of 110-220 V. this range allows a user to plug into household electricity or generators for heavy-duty work. So a professional operator can use it for small household jobs, DIY projects or any heavy-duty industrial work.

Included Parts

The plasma cutter has the following parts in its package: a plasma cutting torch NCP 133having 13′ length with a three-prong connection, a 6′ ground cable with clamp, 6′ air hose and a pre-installed air filter regulator.

Check out: Overall best Plasma Cutters for Money

PROS:

  • Lightweight and portable
  • Constant duty cycle
  • Can work for light-duty and heavy-duty work
  • Offers minimum or no slag
  • Compact design with rugged body
  • One year warranty
  • Can cut rusty, painted metals

CONS:

  • Offers a short power cable
  • Consumables have a short lifespan
Why do I recommend it to you? – Personal review: Strong cutting capability is provided by the Lotos LTP5000D Pilot Arc Plasma Cutter in a small package. This machine sent to me four weeks ago. Adjustments & setup went very smoothly. For the cost, it cut exceptionally well. I was quickly as well as neatly capable of cutting a 1/4″ diamond plates.

This plasma cutter is a fantastic small tool. Mine can easily cut through metal because it is connected to a 220-volt circuit. Very simple to put up and operate. The cost of consumables is slightly higher than that of most other machines.  


2. LOTOS LTPDC2000D

Multi Function Plasma cutter

★★★★★

LOTOS LTPDC2000D best plasma cutter under $1000

Specifications:

  • Weight: 43 pounds
  • Dimensions with handle: 15.5x8x12 inches
  • Input voltage: 110/220 V
  • Dual-frequency: 50-60 Hz
  • Clean cut: ½ inch
  • Severance cut: ¾ inch
  • Duty cycle: 60% @50 amps, 100% @ 35 amp
  • Current output: 10-50 Amp
  • Technology: plasma cutting, TIG and STICK welding

LTPDC2000D is one of the most versatile plasma cutters under $1000. It is a smart plasma cutter which is a welder as well. It gives an output current of 50 Amp for plasma cutting, 200 Amps for TIG welding, and 200 Amps for stick welding.

You don’t need post surface treatments because of the minimum or no slag. It is worth buying because it offers clean-cut, durability, portability and versatility within the same plasma machine. It consists of the following features.

Features:

Non-touch plasma cutter

This non-touch plasma arc cutter gives the maximum current output of 10-50 amps on dual voltage. The plasma torch is non-touch and cuts through the metal without cutting the metal surface. Moreover, using non-compressed air makes the cutting safe for the users.

TIG and STICK welding

It also acts as a TIG welder and sticks welder with 15-200 Amps output current. It is capable of welding stainless steel, alloy steel, mild steel. Thin gauge metals can also be welded without any problems. High-frequency arc start and torch control make the process easy for new users. You can also buy a foot pedal for welding heat control.

Cutting capability

You can cut metals with any surface imperfections, including paints or rusts on the surface. It gives a clean-cut up to ½” thickness with maximum severance of ¾”.

PROS:

  • Versatile and multi-purpose
  • It features plasma cutting with TIG and STICK welding.
  • Gives high output currents
  • Lightweight, portable and compact
  • Smooth finish with minimum or no slag

CONS:

  • It needs a separate pigtail that adds cost.
Why do I recommend it to you? – Personal review: In conclusion, this is the sole tig welder I’ve ever used. Having said that, I must admit that this bad boy is vicious, even though there is undoubtedly a learning curve. Using it to weld some high-oxygen bungs on something like a set of bike pipes was something I just now got around to doing.

As a solid beginner TIG machine, good plasma cutter, & Fantastic Stick device, I like this machine. Ultimately, it’s been among the most significant tool purchases ever. I wouldn’t feel upset if it passed away tomorrow.


3. PrimeWeld 50D Air Inverter

BEST Professional Plasma Cutter

★★★★★

PrimeWeld 50D best plasma cutter under $1000

Specifications:

  • Weight: 23 pounds
  • Dimensions: 15x12x6 inches
  • Input voltage: 120/220 volts
  • Output current: 10-50 Amps
  • Duty cycle: 60% @ 50A
  • Maximum cutting thickness: up to ½”
  • Severance Thickness: ¾”

Primeweld Air 50A plasma cutter is famous for its heavy-duty cutting with the fastest speed. It is capable of cutting up to ½” thick steel plate with its inverter plasma technology. Moreover, it is portable and highly reliable because it has a rugged body. As it gives 50 Amps output, you get extremely fine cuts with minimum or no slag. It features the following characteristics.

Features:

High-frequency plasma arc with MOSFET technology

It has high-frequency lift arc technology that helps to drag and cut through the metal piece. Simply light the torch, strike and drag to start precise cutting. High output current produces a quality cut with minimum or no slag. The MOSFET technology-based plasma cutter works on dual voltage to either plug into 120 V or 240 V.

Lightweight and portable

The plasma cutter weighs only 23 pounds. This small weight makes this plasma cutter the lightest one among other Primeweld cutters. It also features a handle on the cutter’s top. This handle makes the cutter portable, and you can easily carry it anywhere you want.

Dual voltage input power

It works on dual voltage technology. You can either run it on 120V and plug it into household electricity. Or use a commercial 240 V power supply for heavy-duty cutting. The lowest amperage you can have is 20 amp. It is enough to cut as thin as 22 gauge sheet metal without blowing off the edges.

TIG welding and Stick welding

The most amazing feature of the plasma cutter is that it is also a welder. It also features TIG welding and Sticks welding options within the same box. This makes the plasma cutter extremely versatile and a must-have tool for all fabricators.

PROS:

  • Lightweight and portable
  • Features MOSFET inverter technology with TIG and Stick welding
  • Can work  for heavy-duty and high volume cuttings
  • Three-year warranty

CONS:

  • Lift torch technology requires practice prior to professional work
Why do I recommend it to you? – Personal review: You receive your money’s worth with Weld Pro, as with everything else. Then, a few days ago, the edge of the torch developed a hole, perhaps due to my failure to maintain a clean tip.

Great results! I use this machine to chop everything I can’t load onto my horizontal saw because I have one for that purpose. I did not have high expectations for the cost and size, but then I was blown away. This device effortlessly cuts 3/8″ steel bars. Thus, it is superior to a cutting torch.


4. Coral CUT50 50 Amp Dual Voltage

BEST for Small Work

★★★★★

Coral CUT50 50 Amp Dual Voltage best plasma cutter under $1000

Specifications:

  • Weight: 21.2 pounds
  • Dimensions: 17.8×13.8×10.8 inches
  • Duty cycle: 85%
  • Input voltage: 110/220 V
  • Output current: 20-50amp
  • Max cut Thickness: 20mm
  • Rated input capacity: 4.8 KVA

Coral cut50 amp plasma cutter is a famous plasma cutter under $1000 because of its strong structure. It consists of advanced components with inverter technology. All the structure has metallic parts making the cutter highly durable. Moreover, it provides 30% increased efficiency during the cutting process because of its automatic switch power. The exclusive features of the plasma cutter are given in the section below.

Features:

Strong and high-quality structure:

Cut50 plasma cutter has advanced inverter technology to provide superior cutting. It has a strong and sturdy construction. Because all the parts are made of metal, the strength of this plasma cutter is matchless. The quality of the cut is clean, and the resulting surface is smooth with minimum or no slag.

Portable design with LCD display:

The plasma cutter features a compact and portable design. Having a handle on the top makes it super handy and a go-to plasma cutter. The LCD display gives easy readouts and lets you set and control the variables.

Dual voltage:

The plasma cutter works on dual voltage 110-220 V. it can also switch the input power of 90V-260V. This feature helps to plug and play in different environments without needing an external conversion plug.

Cutting capability:

This plasma cutter can handle stainless steel, alloy steel, mild steel, copper and other color materials. It gives a maximum cutting thickness of 20 mm with an effective cutting thickness of 10 mm.

PROS:

  • Includes “plug and play” option
  • LCD screen
  • Portable, lightweight, compact
  • It offers 30% increased efficiency as compared to other cutters

CONS:

  • No known faults till now
Why do I recommend it to you? – Personal review: This beginning arc is non-contact. When the torch button is depressed, air begins to flow, and the arc begins whenever the torch tip is 1/8″ or less away from the grounding work. It functions admirably for light-duty use and is reasonably priced, so it is unlikely to be stolen.This small device has amazed me, and I would suggest it as long as it does not eventually burn out. I’ve employed it to cut box channels plus old work, and so it works exceptionally well for the cost.

5. LOTOS LT5000D 50A

BEST for Hobbist

★★★★★

LOTOS LT5000D

Specifications:

  • Weight: 22.5
  • Input voltage: 110/220V
  • Output current:10-50Amp
  • Duty cycle: 60% @ 50A
  • Dimensions with handle: 15x6x12 inches
  • Power cable length: 6 feet
  • Maximum cutting thickness: ½”
  • Pilot Arc: No

Lotos LT5000D hits the spot of best plasma cutters because of the precision and accuracy it offers. It can cut the materials including stainless steel, mild steel, alloy steel, copper and aluminium up to the thickness of ½” clean-cut and ¾” maximum severance. Because it uses non-hazardous gas, it is safe and extremely satisfying for all users. The irresistible price, fast cutting action, minimum slag and clean cutting makes this plasma cutter the best choice for the users.

Features:

Air plasma cutting with safety and portability

The plasma cutter uses non-hazardous gas that is safe and does not harm its users. The compressed air plasma cutter features a handle on its top. This handle makes the cutter portable and handy. The size is also compact, which maximizes the portability. You can move the plasma cutter anywhere you need.

Quick set up

The plasma cutter has a quick one-minute set-up. The pre-installed NTP ¼ industry type D plug connects to the air compressor along with the air filter regulator. This connection builds up because of the stand coupler attached at the back of the cutter. The whole connection takes less than one minute, and the cutter starts cutting. It saves the time and energy of the user.

Dual voltage

The plasma cutter operates on dual voltage. When we run it at 110V, it gives an output current of 10-35 Amp and gives a cutting thickness of ⅓” and a maximum severance of ⅖”. At 220/240 volts, it 10-50 Amp DC with a clean cut of ½” and a maximum severance of ¾”. The dual voltage helps to connect on either household electricity or heavy commercial power sources like generators.

PROS:

  • Based on PAPST cooling system for maximum performance
  • Lightweight, compact and portable
  • Uses pulse width mold technology
  • Can handle ferrous and nonferrous materials
  • Safer then oxyhydrogen cutting

CONS:

  • Cant handle large volume work
Why do I recommend it to you? – Personal review: This small device is exceptionally excellent. I’m hoping it endures well. On 110, it cuts incredibly beautifully. I need to upgrade my home’s electrical system before utilising it on 220. However, considering how it cuts at 110, I believe 220 will be fantastic.

My little restoration shop offers great value for the money. I’ve used it to cut 1/4 steel, and so it simply blows straight through it! As a result, I am pleased with how simple it is to operate, and I know it will be fantastic once I acquire a genuine compressor.


Conclusion:

Here is the top Best Plasma Cutter Under $1000 as follows:

  • Choose the Lotos LTPDC2000D Plasma Cutter if you want a no-brainer. This device combines a cutter, a TIG welder, and a MIG welder. My plasma cutters have a high speed, which comes with exact cutting.
  • Hobart 500564: The Hobart Airforce 12ci Fan-On-Demand feature reduces power consumption while keeping dust and other contaminants out of the case. It is made to be portable, strong, and inexpensive. The equipment is simple for beginners because of the ergonomic torch, and intelligent settings system.

Good luck!